Company Profile
Baode lights,light up your way
We Are Manufacturer Since 1998
We have over 15 years experience of manufacturing High Mast Lighting Poles. We are one of THREE manufacturers that own AIRPORT EQUIPMENT CERTIFICATION in China. You can find our high mast lights in tens of airports in China, and they are also installed in Kenya Airport, Bangladesh airport and etc.
We manufacture of High Mast Lighting poles with height from 18M-50M
Our production capacity: 1000 pcs per month for High Mast Lighting Poles
Specifications
Height
From 18 m to 50m high mast lighting poles
Suit for
Airport, seaport, plaza, stadium, square, highway station, street way, etc
Shape
Round, Multi-pyramidal, Column form, polygonal or conical
Material
Q345B/A572, minimum yield strength>=345n/mm2
Q235B/A36, minimum yield strength>=235n/mm2
Torrance of dimension
+- 2%
Lighting Source
400 W- 5000 W high pressure sodium flood light, light extension: Up to 30 000 m²
Light plate
Various figure of selection, material with hot dip galvanization steel frame
Lifting system
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; Ant ferromagnetism brake and break proof device, manual operation applied under power cut
Electric appliance control device
Electric appliance box to be the hold of the pole, lifting operation could be 5 meter away from the pole through wire. Time control and light control could be equipped to realize full-load lighting mode and part lighting mode
Surface treatment
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles
Insert mode, inner flange mode, face to face joint mode.
Design of pole
Against earthquake of 8 grade
Wind Speed
80 Km/Hour
Welding We has past flaw testing. Internal and external double welding makes the welding in shape
Thickness 6 mm to 20 mm high mast lighting poles
Production Process
Raw material testCuttingMolding or bending Welding (longitudinal ) Dimension verifyFlangeweldingHole drilling Calibration Deburr Galvanization or powder coating, PaintingRecalibrationThreadPackaging
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom, anyway also can following by client required
Lifting system
Latch barrel with inner mounting bracket locker is mounted to an underside of the mast-top pulley assembly. Furthermore, all steel cables are not exposed and more effectively protected.
Latching mechanism latched on steering arms is able to release strain on steel cables when in the operation position. The process of latching on and off is stable and without vibration.
The bumper is designed on the luminary mounting bracket for avoiding direct damage between mast-top assembly and the raising luminary mounting bracket.
The leveling device for luminary support bracket is easy to operate and convenient to adjust level.
Special designed red-flag indicator has obvious visual effects and reflects actual situation of latching operation.
Testing
| Height |
From 18 m to 50m |
| Suit for |
Airport ,seaport,plaza,stadium ,square,highway station,street way ,etc |
| Shape |
round or polygon |
| Material |
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2 |
| Torrance of dimension |
+- 2% |
| Lighting Source |
400 W- 5000 W high pressure sodium flood light,light extension :up to 30 000 m² |
| Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
| Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e;antiferromagnetism brake and break -proof device,manual operation applied under power cut |
| Electric appliance control device |
Electric appliance box to be be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
| Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
| Joint of Poles |
Insert mode,inner flange mode,face to face joint mode . |
| Design of pole |
Against earthquake of 8 grade |
| Wind Speed |
80 Km/Hour |
| Welding |
We has past flaw testing.Internal and external double welding makes the welding in shape |
| Thickness |
6 mm to 20 mm |
| Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal )→Dimension verify→Flange welding→Hole drilling→Calibration→Deburr→Galvanization or powder coating ,painting→Recalibration→Thread→Packages |
| Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Packages:
Bulb wrappings for high mast lighting poles, individual cartons for lamps and controlling equipments, etc. A 40' HP loads 7-20M/ 6-25M/ 5-30M/ 4-35M high mast lights.
Our projects
Lead Time
20 days on receipt of payment for 10 high mast light poles
Payment Terms
30% in advance and 70% before shipment for our products
Why Us
One-stop Service
You can find solutions for almost all outdoor lighting from us, like street lighting, square lighting, landscape lighting, traffic lighting and commercial lighting and so on.
Vertically Integrated Production System
You will enjoy high-quality product with cost-effective price from us because we manufacture most of the main components from LED source, light fixture, solar panel, pole and even painting powder to control the cost and quality.
15 Years Manufacturing Experience
Since 1998, we have started manufacturing street lighting. The 15 years' experiences have been a persuasive insurance for us to offer reliable products.
Large Factory with Complete Facility
We have 400 staffs with factory area 6000 m2. We also equipped with complete production and testing equipments, such as Steel Pole Rolling Machine, Spray Machine, Pressure Machine, Integrating Sphere, Lighting Simulating Machine and Weather-ability Testing Machines, etc . .
Advanced Technology
Our 60 experienced engineering team work with the PV institute of Shanghai FUDAN University , Shenzhen Foxconn to R&D outdoor lighting products. We have obtained over 20 national patents and built our own brand LUYOU.
Cost Efficiency
Manufacturing main components to save cost. BAODE manufactures the solar panel, light fixture and pole to control the cost and quality.
Factory outlet. There's no middleman between the manufacturer BAODE and domestic and oversea buyers.
We proud of our product
){kind=link}